Macosx escribió:gabyrossi escribió:hola, como estas? tenes algun programa activo de tftp ??? te pones ip de la 1.168 y como gw 1.188 ??? conectado a la internal y con el cable de consola?
te dejo un link con ayuda:
[Debes identificarte para poder ver enlaces.]
saludos
Gabriel
yo tengo el mismo problema que el yo me puse la ip siguiente 192.168.160 y conectado a la 192.168.1.99
no me funciono
FGT50B (11:04-02.28.2007)
Ver:04000007
Super io and COM port initialization completed.
Start RAM initialization.
Start to setup MTRR.
Serial number:FGT50B3G07515680
RAM activation
Ready to main hardware initialization.
Start LCD initialization.
Total RAM: 256MB
Enabling cache...Done.
Start to enumerate PCI device.
Scanning PCI bus...Done.
Start PCI configuration.
Allocating PCI resources...Done.
Start to enable PCI device.
Enabling PCI resources...Done.
Start mainboard final initializ
Start superIO final initialization.
Start northbridge final initialization.
Start southbridge final initialization.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Enabling Interrupts...Done.
Boot up, boot device capacity: 64MB.
Scanning nand flash bad blocks...
Total bad blocks: 1, List (First round) ->>
0x0a01
Scanning nand flash bad blocks...
Total bad blocks: 1, List (Second round) ->>
0x0a01
Press any key to display configuration menu...
....
[G]: Get firmware image from TFTP server.
[F]: Format boot device.
[I]: Configuration and information.
[Q]: Quit menu and continue to boot with default firmware.
[H]: Display this list of options.
Enter Selection [G]:
Enter G,F,I,Q,or H:
info: Failed to scan JFFSv2 file structure
Open boot device failed.