problema fortigate 200b
Publicado: 19 Sep 2013, 16:43
Hola que tal,
recién se adquirió un fortigate 200b, se procedió a formatear el equipo y a instalar el firmware via tftp..luego, al cargar el firmware me salieron los siguientes errores, les dejo el log:
Please connect TFTP server to Ethernet port "1".
Enter TFTP server address [192.168.1.168]:
Enter local address [192.168.1.188]:
Enter firmware image file name [image.out]: fgt200.out
MAC:00090FDA2DDC
#####################
Total 22671976 bytes data downloaded.
Verifying the integrity of the firmware image.
Total 65536kB unzipped.
Save as Default firmware/Backup firmware/Run image without saving:[D/B/R]?d
Programming the boot device now.
................................................................../src/device/usb2/usb.c: 342: usb_start_wait_urb status!=0(-32)
ERROR: Bulk read CSW ret = -32
ERROR: ll_read_block( 5e08, 38810000, c081, 10) = -1
../src/device/usb2/usb.c: 342: usb_start_wait_urb status!=0(-32)
ERROR:Bulk read data ret = -32
../src/device/usb2/usb.c: 342: usb_start_wait_urb status!=0(-32)
recién se adquirió un fortigate 200b, se procedió a formatear el equipo y a instalar el firmware via tftp..luego, al cargar el firmware me salieron los siguientes errores, les dejo el log:
Please connect TFTP server to Ethernet port "1".
Enter TFTP server address [192.168.1.168]:
Enter local address [192.168.1.188]:
Enter firmware image file name [image.out]: fgt200.out
MAC:00090FDA2DDC
#####################
Total 22671976 bytes data downloaded.
Verifying the integrity of the firmware image.
Total 65536kB unzipped.
Save as Default firmware/Backup firmware/Run image without saving:[D/B/R]?d
Programming the boot device now.
................................................................../src/device/usb2/usb.c: 342: usb_start_wait_urb status!=0(-32)
ERROR: Bulk read CSW ret = -32
ERROR: ll_read_block( 5e08, 38810000, c081, 10) = -1
../src/device/usb2/usb.c: 342: usb_start_wait_urb status!=0(-32)
ERROR:Bulk read data ret = -32
../src/device/usb2/usb.c: 342: usb_start_wait_urb status!=0(-32)