RESET FACTORY
Re: RESET FACTORY
buenas tardes, soy Peppe y tengo el mismo problema, pero no encuentro la version correcta para cargar en el fortilog 100A
Recibo siempre el error "invalid compressed format (err=1) o (err=2).
Muchas Gracias (disculpen mi espanol)
Peppe
Recibo siempre el error "invalid compressed format (err=1) o (err=2).
Muchas Gracias (disculpen mi espanol)
Peppe
Re: RESET FACTORY
hola, bajaste ek firware desde el ftp del soporte de fortinet?
o que es lo que estas haciendo?
saludos
o que es lo que estas haciendo?
saludos
NSE 7 – Fortinet Network Security Architect
NSE 5 - Network Security Analyst
NSE 5 - Network Security Analyst
Re: RESET FACTORY
Hola,
estoy siguiendo el procedimiento descrito en :
[Debes identificarte para poder ver enlaces.]
y probando con algunos firmware distintos
version 3.00.
Gracias.
estoy siguiendo el procedimiento descrito en :
[Debes identificarte para poder ver enlaces.]
y probando con algunos firmware distintos
version 3.00.
Gracias.
Re: RESET FACTORY
hola, y estas formateando y luego cargando el firmware cion el tftp?
raro...
raro...
NSE 7 – Fortinet Network Security Architect
NSE 5 - Network Security Analyst
NSE 5 - Network Security Analyst
Re: RESET FACTORY
Hola, el problema ha sido resuelto con linux (ubuntu) y tftpd .
Muchas Gracias a todos.
peppe
Muchas Gracias a todos.
peppe
Re: RESET FACTORY
HOLA TENGO EL MISMO PROBLEMA Open boot device failed.
YA SEGUI LOS PASOS QUE INDICARON PERO CUANDO REINICIO EL FORTIANALYZER ME VUELVE A PASAR LOS MISMO QUE PUEDO HACER.
Scanning PCI bus...Done.
Start PCI configuration.
Allocating PCI resources...Done.
Start to enable PCI device.
Enabling PCI resources...Done.
Start mainboard final initialization.
Start superIO final initialization.
Start northbridge final initialization.
Start southbridge final initialization.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Disabling local APIC...Done.
Boot up, boot device capacity: 122MB.
Press any key to display configuration menu...
..
[G]: Get firmware image from TFTP server.
[F]: Format boot device.
[B]: Boot with backup firmware and set as default.
[C]: Configuration and information.
[Q]: Quit menu and continue to boot with default firmware.
[H]: Display this list of options.
Enter G,F,B,C,Q,or H:
Open boot device failed.
YA SEGUI LOS PASOS QUE INDICARON PERO CUANDO REINICIO EL FORTIANALYZER ME VUELVE A PASAR LOS MISMO QUE PUEDO HACER.
Scanning PCI bus...Done.
Start PCI configuration.
Allocating PCI resources...Done.
Start to enable PCI device.
Enabling PCI resources...Done.
Start mainboard final initialization.
Start superIO final initialization.
Start northbridge final initialization.
Start southbridge final initialization.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Disabling local APIC...Done.
Boot up, boot device capacity: 122MB.
Press any key to display configuration menu...
..
[G]: Get firmware image from TFTP server.
[F]: Format boot device.
[B]: Boot with backup firmware and set as default.
[C]: Configuration and information.
[Q]: Quit menu and continue to boot with default firmware.
[H]: Display this list of options.
Enter G,F,B,C,Q,or H:
Open boot device failed.
Re: RESET FACTORY
HOLA BUEN DIA PODRIAS AYUDARME
Re: RESET FACTORY
hola, tendras que formatear y cargar el firmware nuevamente.
revisa en el foro sobre esos temas.
revisa en el foro sobre esos temas.
NSE 7 – Fortinet Network Security Architect
NSE 5 - Network Security Analyst
NSE 5 - Network Security Analyst
-
- Mensajes: 3
- Registrado: 20 Sep 2016, 17:14
Re: RESET FACTORY
en caso no se pueda entrar con el mantainer por que lo deshabilitaron, como puedo reiniciarlo y si es posible sacar las reglas que estan definidas. tengo un equipo 300d
Re: RESET FACTORY
hola, si tenes permisos para hacer backup y restorear , podrtias modificar el archivo borrarle la clace del admin o modificar el perfil de tu usuario por el de super_admin
saludos
saludos
NSE 7 – Fortinet Network Security Architect
NSE 5 - Network Security Analyst
NSE 5 - Network Security Analyst
Re: RESET FACTORY
no me funciona el comando de
"login: mantainer
password: bcpbFG621B3911600055"
"login: mantainer
password: bcpbFG621B3911600055"
Re: RESET FACTORY
tenes que apagar ekl equipo, prenderlo y cuando aparece el login loguearte con ese usuario y la passs segun el numero de serie, y hacerlo en menos de 30seg.
NSE 7 – Fortinet Network Security Architect
NSE 5 - Network Security Analyst
NSE 5 - Network Security Analyst