problema PPPOE

Para temas referentes al servicio de identificación de contenido de Fortinet (Personalización y configuración de perfiles y categorias de contenido) ofrecido a través del servicio FortiGuard
jroa
Mensajes: 49
Registrado: 03 Ago 2009, 18:35

problema PPPOE

Mensaje por jroa »

Tengo aplicado el ultimo parche a mi fortigate 110C v4.0 build0639,120906 MR3 Patch 10
Originalmente lo habia dejado configurado
Para que el Fortigate realizara la conexion pppoe y mi modem quedara en modo bridge

Funciono bien unas semanas pero ahora la conexion pppoe se reinicia a cada rato toma la iP publica y despues de 5 minutos se reinicia y toma otra IP
y eso me provoca que la VPN se caiga


Configure otro modem del mismo modelo en modo bridge y conecte mi laptop para que realizara la conexion PPPOE y sin problemas ..

anexo log

eo # id=37637 msg="pppd is started"
using channel 24
Using interface ppp1
Connect: ppp1 <--> wan2
Parent: pppoed

Couldn't increase MTU to 1500
Couldn't increase MRU to 1500
PPP send: LCP Configure_Request id(1) len(14) [Maximum_Received_Unit 1492] [Magic_Number 08762628]
PPP recv: LCP Configure_Request id(1) len(18) [Maximum_Received_Unit 1492] [Authentication_Protocol PAP] [Magic_Number 6CAEC473]
PPP send: LCP Configure_Ack id(1) len(18) [Maximum_Received_Unit 1492] [Authentication_Protocol PAP] [Magic_Number 6CAEC473]
PPP recv: LCP Configure_Ack id(1) len(14) [Maximum_Received_Unit 1492] [Magic_Number 08762628]
PPP send: LCP Echo_Request id(0) len(8) [Magic_Number 08762628]
PPP send: PAP 01 01 00 1c 0d 74 6d 78 39 38 34 38 37 31 34 30 30 33 09 64 65 6c 70 68 69 6e 75 73 --> Authentication_Request id(1) peerid(len=13, tmxde3333333) passwd(len=9, mypassws)
PPP recv: LCP Echo_Reply id(0) len(8) [Magic_Number 6caec473]
PPP recv: PAP Authentication_Ack id(1) packet_len=5, message_len=0
PPP send: IPCP Configure_Request id(1) [IP_Address 0.0.0.0] [Primary_DNS_IP_Address 0.0.0.0] [Seconday_DNS_IP_Address 0.0.0.0]
PPP recv: IPCP Configure_Request id(1) [IP_Address 200.38.193.226]
PPP send: IPCP Configure_Ack id(1) [IP_Address 200.38.193.226]
PPP recv: IPCP Configure_Nak id(1) [IP_Address 187.153.57.194] [Primary_DNS_IP_Address 200.33.146.249] [Seconday_DNS_IP_Address 200.33.146.241]
PPP send: IPCP Configure_Request id(2) [IP_Address 187.153.57.194] [Primary_DNS_IP_Address 200.33.146.249] [Seconday_DNS_IP_Address 200.33.146.241]
PPP recv: IPCP Configure_Ack id(2) [IP_Address 187.153.57.194] [Primary_DNS_IP_Address 200.33.146.249] [Seconday_DNS_IP_Address 200.33.146.241]
id=37637 gateway_ip=200.38.193.226 assigned_ip=187.153.57.194 mtu=1492 msg="PPPoE status report"
local IP address 187.153.57.194
remote IP address 200.38.193.226
primary DNS address 200.33.146.249
secondary DNS address 200.33.146.241
PPP send: LCP Echo_Request id(1) len(8) [Magic_Number 08762628]
PPP send: LCP Echo_Request id(2) len(8) [Magic_Number 08762628]
PPP send: LCP Echo_Request id(3) len(8) [Magic_Number 08762628]
No response to 3 echo-requests
Serial link appears to be disconnected.
Couldn't increase MTU to 1500
Couldn't increase MRU to 1500
PPP send: LCP Termiate_Request id(2) len(23)
PPP recv: LCP Terminate_Ack id(2) len(4)
Connection terminated.
Connect time 0.4 minutes.
Sent 7024625 bytes, received 884 bytes.
id=37638 msg="pppd is exiting"

Que recomiendan? Bajo a un firware menos actual?
:?:

Saludos
Responder